View previous topic :: View next topic |
Author |
Message |
boesjev Artist
![Artist Artist](images/Artist.gif)
![](images/avatars//9104335414271d088613be.jpg)
Joined: 25 Apr 2005 Posts: 200 Location: The Netherlands
|
Posted: Mon Dec 19, 2005 3:58 am Post subject: Dust specs |
|
|
I uploaded a dvd-cover and got the following rejection:
Dust specs need removing
I scanned it like al the other dvd-covers (which all where accepted) with the tutorial on this forum.
What should i do to improve the image? _________________ RBC - The trotst van West-Brabant |
|
Back to top |
|
![](templates/Charcoal2/images/spacer.gif) |
tkboxer Resident Artist
![Resident Artist Resident Artist](images/Resident Artist.gif)
![](images/avatars//83153899643923836c72cb.gif)
Joined: 15 May 2005 Posts: 1610
|
Posted: Tue Feb 14, 2006 6:54 pm Post subject: |
|
|
Not seeing the cover that was rejected it is hard to say, however maybe you just had a cover with a few imperfections in highly visible areas, if this is the case zoom in on the image to 100 or even 200% and clone out the imperfections. It usually doesn't take that much time, its not hard to do and it can really improve the overall image. Hope this helps you. |
|
Back to top |
|
![](templates/Charcoal2/images/spacer.gif) |
WPG Guest
![](images/avatars/gallery/Pack 1/duncecap.jpg)
|
Posted: Tue Feb 14, 2006 6:56 pm Post subject: |
|
|
The rejection indicates that there were probably a few too many specks of dust or other imperfections still on the cover. You simply need to use either the healing brush or the clone tool to correct the imperfections and make the scan look as clean as possible. |
|
Back to top |
|
![](templates/Charcoal2/images/spacer.gif) |
|